S9S | Security SD NAND Flash Controller

• SecureDigital (SD) cards for security applications
• microSD and Smart microSD for security applications
• Secure Disk-on-Board applications

• Sequential read up to 90MB/s
• Sequential write up to 90MB/s
• Sustained 4K random write over 7,5MB/s
  

• Compliant to the SD Physical Layer Specifications versions 3.01 to 7.1
• CPRM and ASSD 3.0 can be supported
• Supports DS, HS, SDR12, SDR25, SDR50, SDR104 and DDR50 transfer modes
• Host transfer rate of up to 104 MByte/s in SDR104 mode
• Hardware support for the C2 encryption and decryption routines (CPRM)
• On-chip voltage regulator for 1.8V signaling voltage in SD 3.0 transfer modes

• hyReliability™ flash management: superior wear leveling, read disturb management and power fail management to ensure the highest reliability and endurance
• hyMap® customizable sub-page based Flash Translation Layer (FTL) enables second to none random write performance, minimal write amplification, and consequently the highest endurance for usage profiles with emphasis on random access (e.g. JEDEC Enterprise workload)
• Flexible pre-format settings for SLC caching, over-provisioning, RAID protection and performance tuning including optimization for fast boot-up times
• Advanced thermal management features to maximize performance and data protection at extended temperatures
• Static, dynamic and global wear leveling
• Bad block management, intelligent garbage collection and support for interleaving, cache, and multi-plane programming
• Read disturb management and dynamic data refresh
• Best-in-class power fail management
• Firmware is stored redundantly for recovery and refresh and in-field firmware update without user data lossSecure erase, fast erase and secure trim
• Custom firmware extensions and feature development through firmware API including advanced security support and smartcard chip enablement
• Customized firmware, optimizations and feature implementations possible upon request

• High-performance microprocessor core based on the Hyperstone architecture
• Flexible clock frequency generation through internal oscillator and PLL
• 10 GPIO pins provide flexibility in the connection of extra logic
• Special GPIO transfer modes include ISO7816, I2C and SPI
• AES-128 and AES-256 support with CBC and XTS modes
• SHA-256 hashing engine and hardware RNG
• PKA unit, supporting Elliptic curve cryptography and RSA
• On-die temperature sensor
• Automatic power-down mode during wait periods for host data or flash memory operation completion, automatic sleep mode during host inactivity periods
• Supply voltage power-down detection for full power-down robustness
• On-chip voltage regulator for 1.1V processor core power supply

• Supports legacy asynchronous, Toggle mode and ONFI NAND
• Supports ONFI SDR, NV-DDR, NV-DDR2 and NV-DDR3 transfer modes
• Data transfer rate to flash memories up to 400 MByte/s
• Page buffers in flexible internal memory enable optimum flash channel performance
• Supports all control signals for the flash memory connection
• Supports up to 4 flash memory chip selects
• Supports up to 16 Kbyte flash page size
• Firmware support for continuously updated for all available technologies including SLC, pSLC, 2D MLC, 3D MLC, pMLC, 3D TLC and next generation NAND flashes
• FlashXE® eXtended Endurance read channel optimized for each flash, advanced BCH and GCC ECC algorithms using 1KB to 4KB code words and soft information ECC decoding, read retry, RAID and data recovery features to ensure the lowest possible read error rates and maximum endurance
• Flash memory power down logic and flash memory write protect control
• Firmware storage in flash memory, loaded into internal memory by the boot ROM
• On-chip voltage regulator for 1.2V/1.8V flash memory I/O power supply

• S9-LASK08 - (LGA 64, 7.5 x 4 x 0.7mm, 4CEs, RoHs, -40 to +85 °C)

For die/wafer and customized microSD cards please contact our sales team.